Power Brake

power brake holding brakeis a common fault that can cause vehicle braking failure or poor braking. It is because the brake holds the wheel tightly, so that the wheel cannot turn, thus preventing driving. However, the normal brake will not hold the brake, so when in use, you should always pay attention to the braking condition, and the brake brake should be overhauled immediately.

power brake holding is to use the brake detection system to detect that the wheel is about to lock, which will lower the air pressure of the brake system, and the cylinder of the brake system will not have sufficient pressure, and then it will fail. At the same time, this failure makes the tightly held brake released, the wheel can rotate again, and the brake failure can be solved. The harm can be said to be great. Because once the brake occurs, it will lose the braking function, which will not only cause damage, but also directly endanger the lives of passengers. In addition, it will cause excessive wear of tires, brakes, axles and other components, resulting in various failures.

power brake has the characteristics of light weight. Compared with the traditional brake, it is smaller in weight and easier to install, which can greatly reduce the weight of the instrument and improve the reliability of the instrument. Secondly, it enjoys the characteristics of low noise, because the application of servo technology, the application of special technology, reduces friction, reduces noise, and improves the comfort of the working environment. In addition, enjoy high reliability, the use of servo technology, the application of micro-motor control, improve the reliability of the instrument, reduce the instrument failure rate, improve the performance of the instrument. Enjoy extraordinary performance and safe and reliable characteristics, to meet different application requirements, in the process of installation, commissioning, maintenance and application, should pay attention to safety, to ensure the normal operation of the instrument, in order to maximize efficiency.

power brake, and the common reasons include the following aspects:

itself. If the parts are loose or damaged, it may cause a brake. Uneven pressure. Due to the different lengths of the hydraulic pipelines in different parts of the vehicle, the pressure will be unbalanced, which will lead to the brake. The brake system cylinder is damaged. If a part of the cylinder is damaged. Although there are many reasons, we can take some measures to avoid it, including the following:

check the parts regularly. If any parts are found to be loose or damaged, they should be replaced in time. Avoid prolonged braking. Long-term braking can cause overheating. Avoid driving on excessively rough roads. Excessively rough roads can adversely affect the braking system.

Although the power brake holding brake is a common fault, it can be avoided by strengthening vehicle maintenance and paying attention to driving skills. In addition, in the case of brake holding brake, it should be handled calmly and correct measures should be taken to eliminate the fault and ensure driving safety.